See the

General FAQs

Q.1 : What types of screws are used to fasten the sheets on a steel structure ?

AdAns. : self tapping fasteners/ screws should be used which are punched into the sheet and the purlin. It can be 55mm, 65mm or 75mm in length. We recommend to use advace sheets fixer set and screws for best results as it protects the joints comprehensively.


Q.2 : Is it possible to produce advace sheet in two colours : one inside and another outside ?

Ans. : we can produce the tile with two colours, one colour outside, the other colour inside.


Q.3 : What is the lowest and highest temperature that the tiles can bear ?

Ans. : the lowest temperature is -10°c and the highest temperature is 70°c. we can make special products for below -20°c


Q.4 : What is the load carrying capacity of the sheets ?

Ans. : load carrying is approx 200 kgs - 250 kgs / sq meter evenly distributed after installation. Also, it depends upon the structure. but a proper installed site can easily allow a 75 kgs man to walk on it.


Q.5 : How much is the bending capability till what degree it can be bend ?

Ans. : the sheet can bend very well for arch type domes. however, if you need to fit sheet between a particular distance, then you have to apply the formula b/a < 0.13 to come to the height of the construction as per recommended.



Q.6 : How does it react after getting in contact with fire ?

Ans. : it will retard and only after it gets oxygen above 36°C it will catch fire. the oxygen present in atmosphere is 21% but, if catches fire, very slow it will burn and convert into smoke. if fire is put off, it will stop there and not spread. no hazardous substances are produced during fire. is a Vo category fire retardant product.


Q.7 : What is the process of manufacturing these sheets ?

Ans. : it is manufactured by co-extrusion process with fibre glass inside technology.